自动载入图层，可是图层颜色一直为白色
本帖最后由 xtapple 于 2014-9-23 18:28 编辑感谢大神问题已解决，怎么确定“已解决”完成
我的问题，就是要增加什么代码，我要在FF-Refe时自动新建图层并且是黄色。
比如FF-Shadelight，我要红色，颜色可以自己在代码中写入。
我知道对大神们很简单，感谢至极，拜托。
和llsheng_73的贴子http://bbs.mjtd.com/forum.php?mod=viewthread&tid=100683 有点类似
本帖最后由 llsheng_73 于 2014-9-23 02:09 编辑
(defun c:FF-Refe()(command "-layer" "M" "FF-Refe1" "C"2 "" ""))
"M"命令如果指定图层不存在将会自动建立，后边的"C"和后边的颜色号将修改该图层的颜色,此外还可以为图层指定线型等。具体可通过命令行运行layer命令仔细看它的各种选择进行了解 llsheng_73 发表于 2014-9-23 02:03 static/image/common/back.gif
"M"命令如果指定图层不存在将会自动建立，后边的"C"和后边的颜色号将修改该图层的颜色,此外还可以为图层指 ...
大神你好，
如果我要在(defun c:FF-Refe()(command "-layer" "M" "FF-Refe1" "C"2 "" ""))加个DASHED虚线的线型，要怎么加的。 且看命令列
------------------
Command: -Layer
Current layer:"0"
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock/stAte]:
M
Enter name for new layer (becomes the current layer) <0>: FF-Refe1
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock/stAte]:
C
New color <7 (white)>: 2
Enter name list of layer(s) for color 2 (yellow) <FF-Refe1>:
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock/stAte]:
L
Enter loaded linetype name or [?] <CONTINUOUS>: DASHED
Enter name list of layer(s) for linetype "DASHED" <FF-Refe1>:
Enter an option
[?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock/stAte]:
对映 ===>
(defun c:FF-Refe() (command "-layer" "M" "FF-Refe1" "C" 2 "" "L" "DASHED" "" ""))
页:
[1]