可产生随机高程点、三角网、等高线及动态查高程-by 国外神人 ymg！！
Triang V0.6.7指令：
C:TIN, Generates Delaunay Triangulation and Voronoi Diagram.
C:CONT, Generates Contours from a sset of 3DFACES.
C:GEN, Generates a bunch of points for testing.
C:DEMOZ, Demo of locating yourself in a triangulation.
C:LBL, Generates Label on Major Contour at regular spacing.
C:FLBL, Generates Label on All Contours Along Fence Lines.
C:DLBL, Generates Label Dynamically (Based on Alan JT routine)
C:PROF, Generates a Longitudinal Profile.
C:XSHAPE, (Chi-shape) Generates Concave Boundary Around Triangulation
C:FLIP, Flip Common Edge Between Two Triangles.
原始程式出处：https://www.theswamp.org/index.php?topic=9042.0
作者：ymg
有兴趣的多爬爬帖子，超神人！
不想爬文的就花点币吧！
下方为部份功能演示图，其他的功能请自行测试吧！
YMG , Hello, I've done some tests, the above error is gone, but I found an error I've seen for a long time, the routine creates a bad triangle, the point of the triangle 2 3 4 is in the same direction, this occasions that by making the curves generating an error, this routine may well, the wrong triangle is created to be a point in the middle of a line, it is assumed that the user should not do this, but few would know, in order see dwg, in previous versions I had made a function that eliminated the triangles where the angle was the same between the vertices 2-3 3-4. Thanks and I hope comments.
C:TIN, Generates Delaunay Triangulation and Voronoi Diagram.
C:CONT, Generates Contours from a sset of 3DFACES.
C:GEN, Generates a bunch of points for testing.
C:DEMOZ, Demo of locating yourself in a triangulation.
C:LBL, Generates Label on Major Contour at regular spacing.
C:FLBL, Generates Label on All Contours Along Fence Lines.
C:DLBL, Generates Label Dynamically (Based on Alan JT routine)
C:PROF, Generates a Longitudinal Profile.
C:XSHAPE, (Chi-shape) Generates Concave Boundary Around Triangulation
C:FLIP, Flip Common Edge Between Two Triangles.
YMG,你好,我做了一些测试,上面的错误,但是我发现一个错误我见过很长一段时间,该例程创建一个糟糕的三角形,三角形的点2 3 4方向相同,这场合,通过曲线生成一个错误,这个例程可能,错误的三角形的点创建一条线,它假定用户不应该这样做,但是很少有人知道,为了看到dwg,在以前的版本中我犯了一个函数,消除了三角形的顶点2 - 3 - 4之间的角度是一样的。谢谢,我希望评论。
C:锡、生成德劳内三角测量和泰森多边形法图。
续,从sset 3 dfaces生成轮廓。
创,生成一系列的点进行测试。
C:DEMOZ,演示在三角定位自己。
C:LBL,生成标签主要轮廓有间隔的。
C:FLBL,生成标签在所有沿着栅栏线轮廓。
C:DLBL,动态生成标签(基于艾伦JT常规)
C:教授,生成一个纵向剖面。
C:XSHAPE(Chi-shape)产生凹边界三角
C:翻转,翻转常见的两个三角形之间的边缘。 您好，我住台中，我的工作就是協助土地代書計算調整土地分割面積，請問我可以跟您購買"封閉聚合線面積調整程式"與"區塊屬性萃取"這2款lsp嗎?我的mail: caseyliu@kimo.com
，等候您的回覆，謝謝。
这就是？？？看不懂 厉害~~~~~~~~~~~~~~~~~~~~~ 树櫴希德 发表于 2016-9-24 09:58
YMG , Hello, I've done some tests, the above error is gone, but I found an error I've seen for a lon ...
你翻译的吗？ 树櫴希德 发表于 2016-9-24 09:58
YMG , Hello, I've done some tests, the above error is gone, but I found an error I've seen for a lon ...
你翻译的吗？ 明经币怎么得啊 学习一下，谢谢 谢谢楼主分享！