麻烦高手查看一下,我这个显示有多余的闭括号,导致批量打印自动不加载.

yoyrtweq 发表于 2021-4-22 16:03:22

本帖最后由 yoyrtweq 于 2021-4-22 16:07 编辑

取明经,用明经,这是明经高手写的,我仅修改了图层内容,其他未变.此为源码,显示有多余的闭括号,导致批量打印和一些插件自动不加载.请看下:
(defun xlr-autolayer ()
;(setvar "cmdecho" 0)
;(if (null (tblsearch "layer" "text"))
; (set_layer_list "text" 3 "continuous")
;)
;(if (null (tblsearch "layer" "dim"))
; (set_layer_list "dim" 3 "continuous")
;)

(vl-load-com)
;; 图层初始化列表内容：commands layers color linetype plottable
(setq *doc (vla-get-activedocument (vlax-get-acad-object)))
(setq *lays (vla-get-layers *doc))
(setq *laylst
(list (list "QLEADER" "图标" 12 "CONTINUOUS" T)
      (list "DTEXT" "图标" 12 "CONTINUOUS" T)
      (list "MTEXT" "图标" 12 "CONTINUOUS" T)
      (list "TEXT" "图标" 12 "CONTINUOUS" T)
      (list "CIRCLE" "2 家具-内轮廓线" 7 "CONTINUOUS" T)
      (list "ARC" "1 家具-外轮廓线" 7 "CONTINUOUS"T)
      (list "PLINE" "1 家具-外轮廓线" 7 "CONTINUOUS" T)
      (list "XLINE" "Defpoints" 5 "CONTINUOUS" T)
      (list "SPLINE" "1 家具-外轮廓线" 7 "CONTINUOUS" T)
      (list "RECTANG" "1 家具-外轮廓线" 7 "CONTINUOUS" T)
      (list "CIRCLE" "1 家具-外轮廓线" 7 "CONTINUOUS" T)
      (list "LINE" "2 家具-内轮廓线" 7 "CONTINUOUS" T)
      (list "MVIEW" "Defpoints" 5 "CONTINUOUS" T)
      (list "HATCH" "3 家具-填充线" 34 "CONTINUOUS" T)
      (list "BHATCH" "3 家具-填充线" 34 "CONTINUOUS" T)
)
)
(setq OldLayer nil)
(setq *cmdlst (mapcar 'strcase (mapcar 'car *laylst)))
(mapcar '(lambda (x) (vlr-command-reactor nil x))
(list '((:vlr-commandWillStart . xlr-start))
'((:vlr-commandEnded . xlr-end))
'((:vlr-commandCancelled . xlr-cancel))
)
)
(vlr-editor-reactor
nil
'((:vlr-commandwillstart . xlr-edit))
)
)
;;;----------------------------------------------------------------------------;;;
(defun xlr-edit (CALL CALLBACK /)
(foreach N *laylst
(if (= (strcase (car CALLBACK)) (strcase (car N)))
; 命令反应器返回信息如果与设置的命令相同.
   (progn ;建立图层
(apply 'xsetlays (cdr N))
;(setvar "CLAYER" (cadr N));设为当前层.
   )
)
)
)
;;;----------------------------------------------------------------------------;;;
(defun xlr-start (calling-reactor xlr-startInfo /)
(foreach N *laylst
(if (= (strcase (car xlr-startInfo)) (strcase (car N)))
; 命令反应器返回信息如果与设置的命令相同.
   (progn ;建立图层
(apply 'xsetlays (cdr N))
;(setvar "CLAYER" (cadr N));设为当前层.
   )
)
)
)
;;;----------------------------------------------------------------------------;;;
(defun xlr-end (calling-reactor xlr-endInfo / cmd)
(setq cmd (car xlr-endInfo))
(if (member cmd *cmdlst)
(if (/= oldlayer nil)
   (progn
      (setvar "CLAYER" OldLayer)
      (setq OldLayer nil)
   )
)
)
)
;;;----------------------------------------------------------------------------;;;
(defun xlr-cancel (calling-reactor xlr-cancelInfo / cmd)
(setq cmd (car xlr-cancelInfo))
(if (member cmd *cmdlst)
(if (/= oldlayer nil)
   (progn
      (setvar "CLAYER" OldLayer)
      (setq OldLayer nil)
   )
)
)
)
;;;----------------------------------------------------------------------------;;;
;;;----------------------------------------------------------------------------;;;
(defun xsetlays (LAY-NAM COLOR LTYPE plotk / LAYOBJ LTYPESOBJ)
(if (tblobjname "layer" LAY-NAM)
(progn
   (if (/= (strcase (getvar "CLAYER"))
   (strcase LAY-NAM)
)
(setq OldLayer (getvar "CLAYER"))
(progn
(if (= oldlayer nil)
(setq OldLayer LAY-NAM)
)
)
   )
   (setvar "CLAYER" lay-nam)
)
(progn ;添加图层.
   (vl-catch-all-error-p
(vl-catch-all-apply 'vla-add (list *lays LAY-NAM))
   )
   (setq LAYOBJ (vla-item *lays LAY-NAM))
   (if (not (tblobjname "ltype" LTYPE)) ;添加线型.
(progn
(setq LTYPESOBJ (vla-get-linetypes *doc))
(vla-load LTYPESOBJ LTYPE (findfile "acad.lin"))
;>>>　要加强，在多个*.lin寻找
(vlax-release-object LTYPESOBJ)
)
   ) ;解冻(如冻结)，解锁,设图层为当前,设图层颜色，可打印特性.
   (vla-put-layeron layobj :vlax-true)
   (vla-put-lock layobj :vlax-false)
   (if (= (strcase (getvar "CLAYER")) (strcase lay-nam)) ;解冻.
(vla-put-freeze layobj :vlax-false)
   )
   (vla-put-color layobj color)
   (vla-put-linetype layobj LTYPE)
   (vla-put-plottable
layobj
(if plotk
:vlax-true
:vlax-false
)
   )
)
)
)
(xlr-autolayer) ;加载启动!
(princ "")
)
;;;----------------------------------------------------------------------------;;;
;;;----------------------------------------------------------------------------;;;
(defun xsetlays(lay-nam color ltype plotk / layobj ltypesobj)
(defun layeron (layername / layerdata)
(setq layerdata (entget (tblobjname "LAYER" layername)))
(if (< (cdr (assoc 62 layerdata)) 0)
   (progn
   (setq layerdata (subst
                     (cons 62 (- 0 (cdr (assoc 62 layerdata))))
                     (assoc 62 layerdata)
                     layerdata
                     )
   )
   (entmod layerdata)
   )
)
)
(if (tblobjname "layer" lay-nam)
(progn
   (if (/= (strcase (getvar "clayer")) (strcase lay-nam))
   (setq oldlayer (getvar "clayer"))
   (progn
      (if (= oldlayer nil)
         (setq oldlayer lay-nam)
      )
   )
   )
   (layeron lay-nam)
   (setvar "clayer" lay-nam)
)
(progn
   (vl-catch-all-error-p (vl-catch-all-apply 'vla-add (list *lays lay-nam)))
   (setq layobj (vla-item *lays lay-nam))
   (if (not (tblobjname "ltype" ltype)) ;添加线型.
   (progn
      (setq ltypesobj (vla-get-linetypes *doc))
      (vla-load ltypesobj ltype (findfile "acad.lin"));>>>　要加强，在多个*.lin寻找
      (vlax-release-object ltypesobj)
   )
   )
   (vla-put-layeron layobj :vlax-true)
   (vla-put-lock layobj :vlax-false)
   (if (= (strcase (getvar "clayer")) (command "layer" "on" "" "")(strcase lay-nam)) ;解冻.
   (vla-put-freeze layobj :vlax-false)
   )
   (vla-put-color layobj color)
   (vla-put-linetype layobj LTYPE)
   (vla-put-plottable layobj (if plotk :vlax-true :vlax-false))
)
)

烟盒迷唇 发表于 2021-4-23 06:44:34

(defun xlr-autolayer ()
;(setvar "cmdecho" 0)
;(if (null (tblsearch "layer" "text"))
; (set_layer_list "text" 3 "continuous")
;)
;(if (null (tblsearch "layer" "dim"))
; (set_layer_list "dim" 3 "continuous")
;)

(vl-load-com)
;; 图层初始化列表内容：commands layers color linetype plottable
(setq *doc (vla-get-activedocument (vlax-get-acad-object)))
(setq *lays (vla-get-layers *doc))
(setq *laylst
(list (list "QLEADER" "图标" 12 "CONTINUOUS" T)
(list "DTEXT" "图标" 12 "CONTINUOUS" T)
(list "MTEXT" "图标" 12 "CONTINUOUS" T)
(list "TEXT" "图标" 12 "CONTINUOUS" T)
(list "CIRCLE" "2 家具-内轮廓线" 7 "CONTINUOUS" T)
(list "ARC" "1 家具-外轮廓线" 7 "CONTINUOUS"T)
(list "PLINE" "1 家具-外轮廓线" 7 "CONTINUOUS" T)
(list "XLINE" "Defpoints" 5 "CONTINUOUS" T)
(list "SPLINE" "1 家具-外轮廓线" 7 "CONTINUOUS" T)
(list "RECTANG" "1 家具-外轮廓线" 7 "CONTINUOUS" T)
(list "CIRCLE" "1 家具-外轮廓线" 7 "CONTINUOUS" T)
(list "LINE" "2 家具-内轮廓线" 7 "CONTINUOUS" T)
(list "MVIEW" "Defpoints" 5 "CONTINUOUS" T)
(list "HATCH" "3 家具-填充线" 34 "CONTINUOUS" T)
(list "BHATCH" "3 家具-填充线" 34 "CONTINUOUS" T)
)
)
(setq OldLayer nil)
(setq *cmdlst (mapcar 'strcase (mapcar 'car *laylst)))
(mapcar '(lambda (x) (vlr-command-reactor nil x))
(list '((:vlr-commandWillStart . xlr-start))
'((:vlr-commandEnded . xlr-end))
'((:vlr-commandCancelled . xlr-cancel))
)
)
(vlr-editor-reactor
nil
'((:vlr-commandwillstart . xlr-edit))
)
)
;;;----------------------------------------------------------------------------;;;
(defun xlr-edit (CALL CALLBACK /)
(foreach N *laylst
(if (= (strcase (car CALLBACK)) (strcase (car N)))
; 命令反应器返回信息如果与设置的命令相同.
   (progn ;建立图层
(apply 'xsetlays (cdr N))
;(setvar "CLAYER" (cadr N));设为当前层.
   )
)
)
)
;;;----------------------------------------------------------------------------;;;
(defun xlr-start (calling-reactor xlr-startInfo /)
(foreach N *laylst
(if (= (strcase (car xlr-startInfo)) (strcase (car N)))
; 命令反应器返回信息如果与设置的命令相同.
   (progn ;建立图层
(apply 'xsetlays (cdr N))
;(setvar "CLAYER" (cadr N));设为当前层.
   )
)
)
)
;;;----------------------------------------------------------------------------;;;
(defun xlr-end (calling-reactor xlr-endInfo / cmd)
(setq cmd (car xlr-endInfo))
(if (member cmd *cmdlst)
(if (/= oldlayer nil)
(progn
(setvar "CLAYER" OldLayer)
(setq OldLayer nil)
)
)
)
)
;;;----------------------------------------------------------------------------;;;
(defun xlr-cancel (calling-reactor xlr-cancelInfo / cmd)
(setq cmd (car xlr-cancelInfo))
(if (member cmd *cmdlst)
(if (/= oldlayer nil)
(progn
(setvar "CLAYER" OldLayer)
(setq OldLayer nil)
)
)
)
)
;;;----------------------------------------------------------------------------;;;
;;;----------------------------------------------------------------------------;;;
(defun xsetlays (LAY-NAM COLOR LTYPE plotk / LAYOBJ LTYPESOBJ)
(if (tblobjname "layer" LAY-NAM)
(progn
   (if (/= (strcase (getvar "CLAYER"))
(strcase LAY-NAM)
)
(setq OldLayer (getvar "CLAYER"))
(progn
(if (= oldlayer nil)
(setq OldLayer LAY-NAM)
)
)
   )
   (setvar "CLAYER" lay-nam)
)
(progn ;添加图层.
   (vl-catch-all-error-p
(vl-catch-all-apply 'vla-add (list *lays LAY-NAM))
   )
   (setq LAYOBJ (vla-item *lays LAY-NAM))
   (if (not (tblobjname "ltype" LTYPE)) ;添加线型.
(progn
(setq LTYPESOBJ (vla-get-linetypes *doc))
(vla-load LTYPESOBJ LTYPE (findfile "acad.lin"))
;>>>　要加强，在多个*.lin寻找
(vlax-release-object LTYPESOBJ)
)
   ) ;解冻(如冻结)，解锁,设图层为当前,设图层颜色，可打印特性.
   (vla-put-layeron layobj :vlax-true)
   (vla-put-lock layobj :vlax-false)
   (if (= (strcase (getvar "CLAYER")) (strcase lay-nam)) ;解冻.
(vla-put-freeze layobj :vlax-false)
   )
   (vla-put-color layobj color)
   (vla-put-linetype layobj LTYPE)
   (vla-put-plottable
layobj
(if plotk
:vlax-true
:vlax-false
)
   )
)
)
;)
(xlr-autolayer) ;加载启动!
(princ "")
)
;;;----------------------------------------------------------------------------;;;
;;;----------------------------------------------------------------------------;;;
(defun xsetlays(lay-nam color ltype plotk / layobj ltypesobj)
(defun layeron (layername / layerdata)
(setq layerdata (entget (tblobjname "LAYER" layername)))
(if (< (cdr (assoc 62 layerdata)) 0)
   (progn
   (setq layerdata (subst
                     (cons 62 (- 0 (cdr (assoc 62 layerdata))))
                     (assoc 62 layerdata)
                     layerdata
                     )
   )
   (entmod layerdata)
   )
)
)
(if (tblobjname "layer" lay-nam)
(progn
   (if (/= (strcase (getvar "clayer")) (strcase lay-nam))
   (setq oldlayer (getvar "clayer"))
   (progn
      (if (= oldlayer nil)
         (setq oldlayer lay-nam)
      )
   )
   )
   (layeron lay-nam)
   (setvar "clayer" lay-nam)
)
(progn
   (vl-catch-all-error-p (vl-catch-all-apply 'vla-add (list *lays lay-nam)))
   (setq layobj (vla-item *lays lay-nam))
   (if (not (tblobjname "ltype" ltype)) ;添加线型.
   (progn
      (setq ltypesobj (vla-get-linetypes *doc))
      (vla-load ltypesobj ltype (findfile "acad.lin"));>>>　要加强，在多个*.lin寻找
      (vlax-release-object ltypesobj)
   )
   )
   (vla-put-layeron layobj :vlax-true)
   (vla-put-lock layobj :vlax-false)
   (if (= (strcase (getvar "clayer")) (command "layer" "on" "" "")(strcase lay-nam)) ;解冻.
   (vla-put-freeze layobj :vlax-false)
   )
   (vla-put-color layobj color)
   (vla-put-linetype layobj LTYPE)
   (vla-put-plottable layobj (if plotk :vlax-true :vlax-false))
)
)
)

yoyrtweq 发表于 2021-4-23 08:49:36

烟盒迷唇发表于 2021-4-23 06:44
(defun xlr-autolayer ()
;(setvar "cmdecho" 0)
;(if (null (tblsearch "layer" "text"))

没问题了,我擦我也应该学学LSP,老是麻烦群友大佬

yoyrtweq 发表于 2021-4-23 09:09:37

烟盒迷唇发表于 2021-4-23 06:44
(defun xlr-autolayer ()
;(setvar "cmdecho" 0)
;(if (null (tblsearch "layer" "text"))

使用了 ,添加到acad2012doc里面,但没启用,无效.其他源码插件都启用了使用lsp编辑器编译,还是能通过.不知道是哪里的问题

页: [1]

明经CAD社区's Archiver

麻烦高手查看一下,我这个显示有多余的闭括号,导致批量打印自动不加载.