支持一下，顶
顶顶顶顶顶顶顶
能调整文字与框的距离就好了
很好用，学习了
能调整文字与框的距离就好了
;;----------------------------=={ Box Text }==--------------------------;;
;; ;;
;;This program performs in much the same way as the Express Tools' ;;
;;'TCircle' command: enabling the user to create a 2D polyline ;;
;;rectangular frame around selected Text & MText objects, with a ;;
;;user-defined offset. ;;
;; ;;
;;Upon issuing the command syntax 'BT' at the AutoCAD command-line, ;;
;;the program first prompts the user to specify an offset factor ;;
;;for the text frame. This factor is multiplied by the text height ;;
;;for every selected text object to determine the offset of the ;;
;;rectangular frame from the text. At this prompt, the last used ;;
;;value is available as a default option. ;;
;; ;;
;;The program then prompts the user to make a selection of text ;;
;;and/or mtext objects. Following a valid selection, the program ;;
;;iterates over the selection and constructs a rectangular frame ;;
;;surrounding each object, offset by a distance determined by the ;;
;;given offset factor. The generated text box will inherit the ;;
;;basic properties of the enclosed text object (e.g. Layer, Linetype, ;;
;;Lineweight etc.). ;;
;; ;;
;;The program will also perform successfully with Text or MText ;;
;;defined in any construction plane, and under all UCS & view ;;
;;settings. ;;
;;----------------------------------------------------------------------;;
;;Author:Lee Mac, Copyright © 2010-www.lee-mac.com ;;
;;----------------------------------------------------------------------;;
;;Version 1.2 - 2015-02-22 ;;
;;----------------------------------------------------------------------;;
(defun c:bt ( / *error* def enx idx lst off sel )
(defun *error* ( msg )
(LM:endundo (LM:acdoc))
(if (not (wcmatch (strcase msg t) "*break,*cancel*,*exit*"))
(princ (strcat "\nError: " msg))
)
(princ)
)
(if (or (not (setq def (getenv "LMac\\boxtext-off")))
(not (setq def (distof def 2)))
)
(setenv "LMac\\boxtext-off" (rtos (setq def 0.35) 2 2))
)
(initget 4)
(if (setq off (getreal (strcat "\nSpecify offset factor <" (rtos def 2 2) ">: ")))
(setenv "LMac\\boxtext-off" (rtos off 2 2))
(setq off def)
)
(LM:startundo (LM:acdoc))
(if (setq sel (LM:ssget "\nSelect text or mtext <exit>: " '(((0 . "TEXT,MTEXT")))))
(repeat (setq idx (sslength sel))
(setq enx (entget (ssname sel (setq idx (1- idx))))
lst (text-box-off enx (* off (cdr (assoc 40 enx))))
)
(entmake
(append
'(
(000 . "LWPOLYLINE")
(100 . "AcDbEntity")
(100 . "AcDbPolyline")
(090 . 4)
(070 . 1)
)
(LM:defaultprops enx)
(list (cons038 (caddar lst)))
(mapcar '(lambda ( x ) (cons 10 x)) lst)
(list (assoc 210 enx))
)
)
)
)
(LM:endundo (LM:acdoc))
(princ)
)
;; ssget-Lee Mac
;; A wrapper for the ssget function to permit the use of a custom selection prompt
;; msg - selection prompt
;; arg - list of ssget arguments
(defun LM:ssget ( msg arg / sel )
(princ msg)
(setvar 'nomutt 1)
(setq sel (vl-catch-all-apply 'ssget arg))
(setvar 'nomutt 0)
(if (not (vl-catch-all-error-p sel)) sel)
)
;; Default Properties-Lee Mac
;; Returns a list of DXF properties for the supplied DXF data,
;; substituting default values for absent DXF groups
(defun LM:defaultprops ( enx )
(mapcar '(lambda ( x ) (cond ((assoc (car x) enx)) ( x )))
'(
(006 . "BYLAYER")
(008 . "0")
(039 . 0.0)
(048 . 1.0)
(062 . 256)
(370 . -1)
)
)
)
;; Text Box-gile / Lee Mac
;; Returns an OCS point list describing a rectangular frame surrounding
;; the supplied text or mtext entity with optional offset
;; enx - Text or MText DXF data list
;; off - offset (may be zero)
(defun text-box-off ( enx off / bpt hgt jus lst ocs org rot wid )
(cond
( (= "TEXT" (cdr (assoc 00 enx)))
(setq bpt (cdr (assoc 10 enx))
rot (cdr (assoc 50 enx))
lst (textbox enx)
lst
(list
(list (- (caarlst) off) (- (cadarlst) off)) (list (+ (caadr lst) off) (- (cadarlst) off))
(list (+ (caadr lst) off) (+ (cadadr lst) off)) (list (- (caarlst) off) (+ (cadadr lst) off))
)
)
)
( (= "MTEXT" (cdr (assoc 00 enx)))
(setq ocs(cdr (assoc 210 enx))
bpt(trans (cdr (assoc 10 enx)) 0 ocs)
rot(angle '(0.0 0.0) (trans (cdr (assoc 11 enx)) 0 ocs))
wid(cdr (assoc 42 enx))
hgt(cdr (assoc 43 enx))
jus(cdr (assoc 71 enx))
org(list (cond ((member jus '(2 5 8)) (/ wid -2.0)) ((member jus '(3 6 9)) (- wid)) (0.0))
(cond ((member jus '(1 2 3)) (- hgt)) ((member jus '(4 5 6)) (/ hgt -2.0)) (0.0))
)
lst
(list
(list (- (car org) off) (- (cadr org) off)) (list (+ (car org) wid off) (- (cadr org) off))
(list (+ (car org) wid off) (+ (cadr org) hgt off)) (list (- (car org) off) (+ (cadr org) hgt off))
)
)
)
)
(if lst
( (lambda ( m ) (mapcar '(lambda ( p ) (mapcar '+ (mxv m p) bpt)) lst))
(list
(list (cos rot) (sin (- rot)) 0.0)
(list (sin rot) (cos rot) 0.0)
'(0.0 0.0 1.0)
)
)
)
)
;; Matrix x Vector-Vladimir Nesterovsky
;; Args: m - nxn matrix, v - vector in R^n
(defun mxv ( m v )
(mapcar '(lambda ( r ) (apply '+ (mapcar '* r v))) m)
)
;; Start Undo-Lee Mac
;; Opens an Undo Group.
(defun LM:startundo ( doc )
(LM:endundo doc)
(vla-startundomark doc)
)
;; End Undo-Lee Mac
;; Closes an Undo Group.
(defun LM:endundo ( doc )
(while (= 8 (logand 8 (getvar 'undoctl)))
(vla-endundomark doc)
)
)
;; Active Document-Lee Mac
;; Returns the VLA Active Document Object
(defun LM:acdoc nil
(eval (list 'defun 'LM:acdoc 'nil (vla-get-activedocument (vlax-get-acad-object))))
(LM:acdoc)
)
;;----------------------------------------------------------------------;;
(vl-load-com)
(princ
(strcat
"\n:: BoxText.lsp | Version 1.2 | \\U+00A9 Lee Mac "
(menucmd "m=$(edtime,0,yyyy)")
" www.lee-mac.com ::"
"\n:: Type \"bt\" to Invoke ::"
)
)
(princ)
;;----------------------------------------------------------------------;;
;; End of File ;;
;;----------------------------------------------------------------------;;
谢谢分享，这功能不错哦、
这个程序能不能免费哦
文本会跑偏
谢谢分享！！！！！