明经CAD社区

 找回密码
 注册

QQ登录

只需一步,快速开始

搜索
查看: 2152|回复: 5

俺做了个自动标公差的程序,但总不如意,望大家帮忙看看,提提意见[分享]

[复制链接]
发表于 2002-6-6 13:46:00 | 显示全部楼层 |阅读模式

1)b_tolerance.lsp
(cond
( (and ai_dcl (listp ai_dcl))) ; it's already loaded.

( (not (findfile "ai_utils.lsp")) ; find it
(ai_abort "DDMODIFY"
(strcat "Can't locate file AI_UTILS.LSP."
"\n Check support directory.")))

( (eq "failed" (load "ai_utils" "failed")) ; load it
(ai_abort "DDMODIFY" "Can't load file AI_UTILS.LSP"))
)

(defun B_TOLERANCE_HILITE;重点显示选中图象项
(
B_tolerance_tile
/
)
(if (/= B_tolerance_last_slide B_tolerance_tile)
(progn
(mode_tile B_tolerance_tile 4)
(if (/= B_tolerance_last_slide nil)
(mode_tile B_tolerance_last_slide 4)
);end-if
);end-progn
);end-if
(setq B_tolerance_last_slide B_tolerance_tile)
);end-B_TOLERANCE_HILITE

(defun B_TOLERANCE_READ_TXT;读出尺寸的大小
(
/
B_dim_name;和所选尺寸相对应的块名
B_dim_txt;尺寸文本(CHR)
B_dim_sset;和所选尺寸相对应的块的子实体名
B_dim_length;尺寸文本的长度
B_dim_txt_str;中间字符串变量
B_dim_txt_no;中间计数变量
B_dim_txt_chr;中间字符变量
)
(if (/= (cdr (assoc 0 B_dim_ent)) "DIMENSION")
(progn
(prompt "\n这不是个尺寸标注")
(setq B_dim_choose -1)
);end-progn当不是尺寸标注时由B_dim_choose判断
(progn
(setq B_dim_or (cdr (assoc 1 B_dim_ent)));当是自动生成的尺寸文本时为空
(setq B_dim_name (cdr (assoc 2 B_dim_ent)));读出同名的块名
(setq B_dim_sset (cdr (assoc -2 (tblsearch "BLOCK" B_dim_name))));找块的实体名
(while (/= (cdr (assoc 0 (entget B_dim_sset))) "MTEXT")
(setq B_dim_sset (entnext B_dim_sset))
);end-while寻找写有尺寸大小文本的子实体
(setq B_dim_txt (cdr (assoc 1 (entget B_dim_sset))));读出尺寸大小文本
(setq B_dim_height (cdr (assoc 40 (entget B_dim_sset))))
(setq B_dim_length (strlen B_dim_txt));读出尺寸大小文本的长度
(if (= (substr B_dim_txt 4 1) ";")
(progn
(setq B_dim_length (- B_dim_length 4))
(setq B_dim_txt (substr B_dim_txt 5 B_dim_length))
);end-progn
);end-if去掉读出的尺寸文本的前缀
(cond
((= (substr B_dim_txt 1 1) "r")
(setq B_dim_length (- B_dim_length 1))
(setq B_dim_txt (substr B_dim_txt 2 B_dim_length))
);end-1
((= (substr B_dim_txt 1 1) "R")
(setq B_dim_length (- B_dim_length 1))
(setq B_dim_txt (substr B_dim_txt 2 B_dim_length))
);end-1
((= (substr B_dim_txt 1 1) "m")
(setq B_dim_length (- B_dim_length 1))
(setq B_dim_txt (substr B_dim_txt 2 B_dim_length))
);end-1
((= (substr B_dim_txt 1 1) "M")
(setq B_dim_length (- B_dim_length 1))
(setq B_dim_txt (substr B_dim_txt 2 B_dim_length))
);end-1
((= (substr B_dim_txt 2 6) "U+2205")
(setq B_dim_length (- B_dim_length 7))
(setq B_dim_txt (substr B_dim_txt 8 B_dim_length))
);end-1
);end-cond
(setq B_dim_txt_str "")
(setq B_dim_txt_no B_dim_length)
(while (> B_dim_txt_no 0)
(setq B_dim_txt_no (1- B_dim_txt_no))
(setq B_dim_txt_chr (substr B_dim_txt (- B_dim_length B_dim_txt_no) 1))
(if (/= B_dim_txt_chr ",")
(setq B_dim_txt_str (strcat B_dim_txt_str B_dim_txt_chr))
);end-if
);end-while
(setq B_dim_txt B_dim_txt_str);去掉尺寸文本里的","
(setq B_dim_size (atof B_dim_txt))
(if (> B_dim_size 3150.0)
(progn
(if (null B_ERROR) (load "B_ERROR"))
(B_ERROR "超出程序设计范围,本程序无法计算,请查标准公差手册标注")
(setq B_dim_choose -2)
);end-progn
);end-if
);end-progn
);end-if
);B_TOLERANCE_READ_TXT



(defun B_TOLERANCE_CODE_BEGIN
(
/
B_tolerancd_code_temp
)
(setq B_tolerance_code
'("a" "b" "c" "d" "e" "f"
"g" "h" "js" "j" "k" "m" "n" "p" "r" "s"
"t" "u" "v" "x" "y" "z"
)
);end-setq
(if (= (nth 2 B_deflection_es_list) 0.0)
(progn
(setq B_tolerance_code (subst "o" "a" B_tolerance_code))
(setq B_tolerance_code (subst "o" "b" B_tolerance_code))
(setq B_tolerance_code (subst "o" "c" B_tolerance_code))
(setq B_tolerance_code (subst "o" "j" B_tolerance_code))
(setq B_tolerance_code (subst "o" "v" B_tolerance_code))
(setq B_tolerance_code (subst "o" "x" B_tolerance_code))
(setq B_tolerance_code (subst "o" "y" B_tolerance_code))
(setq B_tolerance_code (subst "o" "z" B_tolerance_code))
);end-progn
);end-if
(if (= (nth 21 B_deflection_es_list) 0.0)
(progn
(setq B_tolerance_code (subst "o" "t" B_tolerance_code))
);end-progn
);end-if
(if (= (nth 23 B_deflection_es_list) 0.0)
(progn
(setq B_tolerance_code (subst "o" "v" B_tolerance_code))
);end-progn
);end-if
(if (= (nth 25 B_deflection_es_list) 0.0)
(progn
(setq B_tolerance_code (subst "o" "y" B_tolerance_code))
);end-progn
);end-if
(setq B_tolerancd_code_temp '())
(repeat (length B_tolerance_code)
(if (/= (car B_tolerance_code) "o")
(setq B_tolerancd_code_temp (cons (car B_tolerance_code) B_tolerancd_code_temp))
);end-if
(setq B_tolerance_code (cdr B_tolerance_code))
);end-repeat
(setq B_tolerance_code (reverse B_tolerancd_code_temp))
);end-B_TOLERANCE_CODE_BEGIN

(defun B_TOLERANCE_RATE_BEGIN
(
/
)
(if (<= B_dim_size 500.0)
(cond
((or (= B_tolerance_deflection "A") (= B_tolerance_deflection "B"))
(setq B_tolerance_rate '(9 10 11 12))
(setq B_tolerance_criterion 11)
);end-500-A-B
((or (= B_tolerance_deflection "a") (= B_tolerance_deflection "b"))
(setq B_tolerance_rate '(9 10 11 12 13))
(setq B_tolerance_criterion 11)
);end-500-a-b
((or (= B_tolerance_deflection "C") (= B_tolerance_deflection "c"))
(setq B_tolerance_rate '(8 9 10 11 12))
(setq B_tolerance_criterion 11)
);end-500-C-c
((or (= B_tolerance_deflection "D") (= B_tolerance_deflection "d"))
(setq B_tolerance_rate '(7 8 9 10 11))
(setq B_tolerance_criterion 9)
);end-500-D-d
((= B_tolerance_deflection "E")
(setq B_tolerance_rate '(7 8 9 10))
(setq B_tolerance_criterion 9)
);end-500-E
((= B_tolerance_deflection "e")
(setq B_tolerance_rate '(6 7 8 9 10))
(setq B_tolerance_criterion 9)
);end-500-e
((= B_tolerance_deflection "F")
(setq B_tolerance_rate '(6 7 8 9))
(setq B_tolerance_criterion 8)
);end-500-F
((or (= B_tolerance_deflection "f") (= B_tolerance_deflection "N") (= B_tolerance_deflection "P"))
(setq B_tolerance_rate '(5 6 7 8 9))
(setq B_tolerance_criterion 7)
);end-500-f-N-P
((or (= B_tolerance_deflection "G") (= B_tolerance_deflection "R") (= B_tolerance_deflection "S") (= B_tolerance_deflection "t") (= B_tolerance_deflection "u") (= B_tolerance_deflection "v") (= B_tolerance_deflection "x"))
(setq B_tolerance_rate '(5 6 7 8))
(setq B_tolerance_criterion 7)
);end-500-G-R-S-t-u-v-x
((or (= B_tolerance_deflection "g") (= B_tolerance_deflection "K") (= B_tolerance_deflection "M") (= B_tolerance_deflection "k") (= B_tolerance_deflection "m") (= B_tolerance_deflection "n") (= B_tolerance_deflection "p") (= B_tolerance_deflection "r") (= B_tolerance_deflection "s"))
(setq B_tolerance_rate '(4 5 6 7 8))
(setq B_tolerance_criterion 6)
);end-500-K-M-g-k-m-n-p-r-s
((or (= B_tolerance_deflection "H") (= B_tolerance_deflection "h") (= B_tolerance_deflection "JS") (= B_tolerance_deflection "js"))
(setq B_tolerance_rate '(1 2 3 4 5 6 7 8 9 10 11 12 13))
(setq B_tolerance_criterion 7)
);end-500-H-h-JS-js
((or (= B_tolerance_deflection "J") (= B_tolerance_deflection "T") (= B_tolerance_deflection "U") (= B_tolerance_deflection "V") (= B_tolerance_deflection "X") (= B_tolerance_deflection "Y") (= B_tolerance_deflection "Z") (= B_tolerance_deflection "y") (= B_tolerance_deflection "z"))
(setq B_tolerance_rate '(6 7 8))
(setq B_tolerance_criterion 7)
);end-500-J-T-U-V-X-Y-Z-y-z
((= B_tolerance_deflection "j")
(setq B_tolerance_rate '(5 6 7))
(setq B_tolerance_criterion 6)
);end-500-g
);end-cond
(cond
((or (= B_tolerance_deflection "D") (= B_tolerance_deflection "d"))
(setq B_tolerance_rate '(8 9 10 11))
(setq B_tolerance_criterion 9)
);end-3150-D-d
((or (= B_tolerance_deflection "E") (= B_tolerance_deflection "e"))
(setq B_tolerance_rate '(8 9))
(setq B_tolerance_criterion 9)
);end-3150-E-e
((or (= B_tolerance_deflection "F") (= B_tolerance_deflection "f"))
(setq B_tolerance_rate '(7 8 9))
(setq B_tolerance_criterion 8)
);end-3150-F-f
((or (= B_tolerance_deflection "H") (= B_tolerance_deflection "JS") (= B_tolerance_deflection "h") (= B_tolerance_deflection "js"))
(setq B_tolerance_rate '(6 7 8 9 10 11 12))
(setq B_tolerance_criterion 9)
);end-3150-H-JS-h-js
((or (= B_tolerance_deflection "G") (= B_tolerance_deflection "K") (= B_tolerance_deflection "M") (= B_tolerance_deflection "N") (= B_tolerance_deflection "g") (= B_tolerance_deflection "k") (= B_tolerance_deflection "m") (= B_tolerance_deflection "n") (= B_tolerance_deflection "p") (= B_tolerance_deflection "r") (= B_tolerance_deflection "s") (= B_tolerance_deflection "t") (= B_tolerance_deflection "u"))
(setq B_tolerance_rate '(6 7))
(setq B_tolerance_criterion 7)
);end-3150-G-K-M-N-g-k-m-n-p-r-s-t-u
);end-cond
);end-if
);end-B_TOLERANCE_RATE_BEGIN

(defun B_TOLERANCE_DEFLECTION_READ
(
/
B_deflection_ascii
)
(setq B_deflection_ascii (ascii (strcase B_tolerance_deflection)))
(cond
((and (>= B_deflection_ascii 65) (<= B_deflection_ascii 67))
(setq B_deflection_es (nth (- B_deflection_ascii 63) B_deflection_es_list))
);end-A-B-C
((and (>= B_deflection_ascii 68) (<= B_deflection_ascii 69))
(setq B_deflection_es (nth (- B_deflection_ascii 62) B_deflection_es_list))
);end-D-E
((= B_deflection_ascii 70)
(setq B_deflection_es (nth (- B_deflection_ascii 61) B_deflection_es_list))
);end-F
((= B_deflection_ascii 71)
(setq B_deflection_es (nth (- B_deflection_ascii 60) B_deflection_es_list))
);end-G
((= B_deflection_ascii 72)
(setq B_deflection_es 0.0)
);end-H
((= (strcase B_tolerance_deflection) "J")
(cond
((or (= B_tolerance_criterion 5) (= B_tolerance_criterion 6))
(setq B_deflection_es (nth 12 B_deflection_es_list))
);end-J5-J6
((= B_tolerance_criterion 7)
(setq B_deflection_es (nth 13 B_deflection_es_list))
);end-J7
((= B_tolerance_criterion 8)
(setq B_deflection_es 0.0)
);end-J8
);end-cond
);end-J
((= B_deflection_ascii 75)
(setq B_deflection_es (nth (- B_deflection_ascii 60) B_deflection_es_list))
);end-K
((and (>= B_deflection_ascii 77) (<= B_deflection_ascii 78))
(setq B_deflection_es (nth (- B_deflection_ascii 61) B_deflection_es_list))
);end-D-E
((= B_deflection_ascii 80)
(setq B_deflection_es (nth 18 B_deflection_es_list))
);end-p
((and (>= B_deflection_ascii 82) (<= B_deflection_ascii 86))
(setq B_deflection_es (nth (- B_deflection_ascii 63) B_deflection_es_list))
);end-R-S-T-U-V
((and (>= B_deflection_ascii 88) (<= B_deflection_ascii 90))
(setq B_deflection_es (nth (- B_deflection_ascii 64) B_deflection_es_list))
);end-X-Y-Z
);end-cond
(if (= B_tolerance_shaft 10501)
(B_DEFLECTION_HOLE_AMELIORATE)
);end-if
(setq B_deflection_es (/ B_deflection_es 1000.0))
);end-B_TOLERANCE_DEFLECTION_READ

(defun B_DEFLECTION_HOLE_AMELIORATE
(
/
B_hole_ascii
B_hole_ameliorate_list
B_hole_ameliorate
)
(setq B_hole_ascii (ascii B_tolerance_deflection))
(setq B_deflection_es (* B_deflection_es -1.0))
(if (null B_DATE_LIST_NO) (load "B_DATE_LIST_NO"))
(setq B_hole_ameliorate_list (B_DATE_LIST_NO "B_TOLERANCE_AMELIORATE.DAT" B_criterion_count))
(setq B_hole_ameliorate_list (mapcar 'atof B_hole_ameliorate_list))
(setq B_hole_ameliorate 0.0)
(if (and (>= B_tolerance_criterion 3) (<= B_tolerance_criterion 8))
(setq B_hole_ameliorate (nth (- B_tolerance_criterion 1) B_hole_ameliorate_list))
);end-if
(if (and (>= B_hole_ascii 80) (<= B_tolerance_criterion 7))
(setq B_deflection_es (+ B_deflection_es B_hole_ameliorate))
);end-if-P--Z.AND.<=7
(if (and (= B_hole_ascii 75) (<= B_tolerance_criterion 8))
(setq B_deflection_es (+ B_deflection_es B_hole_ameliorate))
);end-if-K
(if (and (= B_hole_ascii 77) (<= B_tolerance_criterion 8))
(setq B_deflection_es (+ B_deflection_es B_hole_ameliorate))
);end-if-M
(if (and (= B_hole_ascii 78) (<= B_tolerance_criterion 8))
(setq B_deflection_es (+ B_deflection_es B_hole_ameliorate))
);end-if-N
(if (= B_tolerance_deflection "J")
(setq B_deflection_es (+ (nth (+ B_tolerance_criterion 2) B_hole_ameliorate_list) B_deflection_es))
);end-if-J
);end-B_DEFLECTION_HOLE_AMELIORATE

(defun B_TOLERANCE_CALCULATE
(
/
)
(if (= B_tolerance_shaft 10501)
(if (<= (ascii (strcase B_tolerance_deflection)) 72)
(progn
(setq B_tolerance_lay B_deflection_es)
(setq B_tolerance_sur (+ B_tolerance_lay B_criterion_it))
);end-progn
(progn
(setq B_tolerance_sur B_deflection_es)
(setq B_tolerance_lay (- B_tolerance_sur B_criterion_it))
);end-progn
);end-if
(if (<= (ascii (strcase B_tolerance_deflection)) 72)
(progn
(setq B_tolerance_sur B_deflection_es)
(setq B_tolerance_lay (- B_tolerance_sur B_criterion_it))
);end-progn
(progn
(setq B_tolerance_lay B_deflection_es)
(setq B_tolerance_sur (+ B_tolerance_lay B_criterion_it))
);end-progn
);end-if
);end-if
(if (= (strcase B_tolerance_deflection) "JS")
(progn
(setq B_tolerance_sur (/ B_criterion_it 2.0))
(setq B_tolerance_lay (* B_tolerance_sur -1.0))
);end-progn
);end-if
);end-B_TOLERANCE_CALCULATE

(defun B_TOLERANCE_PREFIX_CHANGE
(
/
)
(if (= B_tolerance_prefix 10511)
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "B_TOLERANCE_PREFIX" "B_TOLERANCE" "B_TOLERANCE_PREFIX_DCL")
(setq B_tolerance_prefix 10512)
);end-progn
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "" "B_TOLERANCE" "B_TOLERANCE_PREFIX_DCL")
(setq B_tolerance_prefix 10511)
);end-progn
);end-if
);end-B_TOLERANCE_PREFIX_CHANGE

(defun B_TOLERANCE_MIDFIX_CHANGE
(
/
)
(if (= B_tolerance_midfix 10521)
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "B_TOLERANCE_MIDFIX" "B_TOLERANCE" "B_TOLERANCE_MIDFIX_DCL")
(B_SLIDE_STAR "B_TOLERANCE_SUFFIX" "B_TOLERANCE" "B_TOLERANCE_SUFFIX_DCL")
(setq B_tolerance_midfix 10522)
);end-progn
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "" "B_TOLERANCE" "B_TOLERANCE_MIDFIX_DCL")
(B_SLIDE_STAR "" "B_TOLERANCE" "B_TOLERANCE_SUFFIX_DCL")
(setq B_tolerance_midfix 10521)
);end-progn
);end-if
);end-B_TOLERANCE_MIDFIX_CHANGE

(defun B_TOLERANCE_SHAFT_CHANGE
(
/
)
(if (= B_tolerance_shaft 10501)
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "B_TOLERANCE_SHAFT" "B_TOLERANCE" "B_TOLERANCE_SHAFT_DCL")
(set_tile "B_TOLERANCE_SHAFT_S_DCL" "1")
(setq B_tolerance_shaft 10502)
(setq B_tolerance_code
(mapcar
'(lambda (x) (strcase x T)
)
B_tolerance_code
);end-mapcar
);end-setq
(B_TOLERANCE_CODE_LIST_SET)
(setq B_tolerance_deflection "h")
);end-progn
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "B_TOLERANCE_HOLE" "B_TOLERANCE" "B_TOLERANCE_SHAFT_DCL")
(set_tile "B_TOLERANCE_SHAFT_S_DCL" "0")
(setq B_tolerance_shaft 10501)
(setq B_tolerance_code
(mapcar
'(lambda (x) (strcase x)
)
B_tolerance_code
);end-mapcar
);end-setq
(B_TOLERANCE_CODE_LIST_SET)
(setq B_tolerance_deflection "H")
);end-progn
);end-if
(B_TOLERANCE_DEFLECTION_DCL_DEFAULT)
(B_TOLERANCE_RATE_BEGIN)
(B_TOLERANCE_RATE_LIST_SET)
(B_TOLERANCE_CRITERION_DCL_DEFAULT)
(setq B_criterion_it (nth (1+ B_tolerance_criterion) B_criterion_it_list))
(if (< B_tolerance_criterion 12)
(setq B_criterion_it (/ B_criterion_it 1000.0))
);end-if
(B_TOLERANCE_DEFLECTION_READ)
(B_TOLERANCE_CALCULATE)
(set_tile "B_TOLERANCE_DEFLECTION_SUR_DCL" (rtos B_tolerance_sur))
(set_tile "B_TOLERANCE_DEFLECTION_LAY_DCL" (rtos B_tolerance_lay))
);end-B_TOLERANCE_SHAFT_CHANGE

(defun B_TOLERANCE_DEFLECTION_SELECTION
(
/
B_tolerance_deflection_count
)
(setq B_tolerance_deflection_count (atoi (get_tile "B_TOLERANCE_DEFLECTION_S_DCL")))
(setq B_tolerance_deflection (nth B_tolerance_deflection_count B_tolerance_code))
(set_tile "B_TOLERANCE_DEFLECTION_DCL" B_tolerance_deflection)
(B_TOLERANCE_RATE_BEGIN)
(B_TOLERANCE_RATE_LIST_SET)
(B_TOLERANCE_CRITERION_DCL_DEFAULT)
(setq B_criterion_it (nth (1+ B_tolerance_criterion) B_criterion_it_list))
(if (< B_tolerance_criterion 12)
(setq B_criterion_it (/ B_criterion_it 1000.0))
);end-if
(B_TOLERANCE_DEFLECTION_READ)
(B_TOLERANCE_CALCULATE)
(set_tile "B_TOLERANCE_DEFLECTION_SUR_DCL" (rtos B_tolerance_sur))
(set_tile "B_TOLERANCE_DEFLECTION_LAY_DCL" (rtos B_tolerance_lay))
);end-B_TOLERANCE_DEFLECTION_SELECTION

(defun B_TOLERANCE_RATE_SELECTION
(
/
B_tolerance_criterion_count
)
(setq B_tolerance_criterion_count (atoi (get_tile "B_TOLERANCE_RATE_S_DCL")))
(setq B_tolerance_criterion (nth B_tolerance_criterion_count B_tolerance_rate))
(setq B_criterion_it (nth (1+ B_tolerance_criterion) B_criterion_it_list))
(if (< B_tolerance_criterion 12)
(setq B_criterion_it (/ B_criterion_it 1000.0))
);end-if
(B_TOLERANCE_DEFLECTION_READ)
(B_TOLERANCE_CALCULATE)
(set_tile "B_TOLERANCE_RATE_DCL" (itoa B_tolerance_criterion))
(set_tile "B_TOLERANCE_CRITERION_DCL" (rtos B_criterion_it))
(set_tile "B_TOLERANCE_DEFLECTION_SUR_DCL" (rtos B_tolerance_sur))
(set_tile "B_TOLERANCE_DEFLECTION_LAY_DCL" (rtos B_tolerance_lay))
);end-B_TOLERANCE_RATE_SELECTION

(defun B_TOLERANCE_DEFLECTION_DCL_DEFAULT
(
/
B_tolerancd_count
B_tolerancd_code_temp
)
(setq B_tolerancd_code_temp B_tolerance_code)
(setq B_tolerancd_count 0)
(while (/= (car B_tolerancd_code_temp) B_tolerance_deflection)
(setq B_tolerancd_count (+ B_tolerancd_count 1))
(setq B_tolerancd_code_temp (cdr B_tolerancd_code_temp))
);end-while
(set_tile "B_TOLERANCE_DEFLECTION_DCL" B_tolerance_deflection)
(set_tile "B_TOLERANCE_DEFLECTION_S_DCL" (rtos B_tolerancd_count))
);end-B_TOLERANCE_DEFLECTION_DCL_DEFAULT

(defun B_TOLERANCE_CRITERION_DCL_DEFAULT
(
/
B_tolerancd_count
B_tolerancd_code_temp
)
(setq B_tolerancd_code_temp B_tolerance_rate)
(setq B_tolerancd_count 0)
(while (/= (car B_tolerancd_code_temp) B_tolerance_criterion)
(setq B_tolerancd_count (+ B_tolerancd_count 1))
(setq B_tolerancd_code_temp (cdr B_tolerancd_code_temp))
);end-while
(set_tile "B_TOLERANCE_RATE_DCL" (itoa B_tolerance_criterion))
(set_tile "B_TOLERANCE_RATE_S_DCL" (rtos B_tolerancd_count))
);end-B_TOLERANCE_CRITERION_DCL_DEFAULT

(defun B_TOLERANCE_CODE_LIST_SET
(
/
B_tolerance_code_addlist
)
(setq B_tolerance_code_addlist B_tolerance_code)
(if (= (car B_tolerance_code) "D")
(progn
(setq B_tolerance_code_addlist (reverse B_tolerance_code_addlist))
(setq B_tolerance_code_addlist (reverse (member '"N" B_tolerance_code_addlist)))
)
);end-if
(start_list "B_TOLERANCE_DEFLECTION_S_DCL")
(mapcar 'add_list B_tolerance_code_addlist)
(end_list)
);end-B_TOLERANCE_CODE_LIST_SET

(defun B_TOLERANCE_RATE_LIST_SET
(
/
)
(start_list "B_TOLERANCE_RATE_S_DCL")
(mapcar 'add_list (mapcar 'itoa B_tolerance_rate))
(end_list)
);end-B_TOLERANCE_RATE_LIST_SET

(defun B_TOLERANCE_SET_BEGIN
(
/
)
(B_TOLERANCE_CODE_BEGIN)
(setq B_tolerance_shaft 10501)
(setq B_tolerance_prefix 10511)
(setq B_tolerance_midfix 10521)
(setq B_tolerance_deflection "H")
(B_TOLERANCE_RATE_BEGIN)
);end-B_TOLERANCE_SET_BEGIN

(defun B_TOLERANCE_DCL_DEFAULT
(
/
)
(if (= B_tolerance_shaft 10501)
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "B_TOLERANCE_HOLE" "B_TOLERANCE" "B_TOLERANCE_SHAFT_DCL")
(set_tile "B_TOLERANCE_SHAFT_S_DCL" "0")
(setq B_tolerance_code
(mapcar
'(lambda (x) (strcase x)
)
B_tolerance_code
);end-mapcar
);end-setq
(B_TOLERANCE_CODE_LIST_SET)
(B_TOLERANCE_RATE_LIST_SET)
);end-progn
);end-if
(if (= B_tolerance_prefix 10511)
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "" "B_TOLERANCE" "B_TOLERANCE_PREFIX_DCL")
);end-progn
);end-if
(if (= B_tolerance_midfix 10521)
(progn
(if (null B_SLIDE_STAR) (load "B_SLIDE_STAR"))
(B_SLIDE_STAR "" "B_TOLERANCE" "B_TOLERANCE_MIDFIX_DCL")
(B_SLIDE_STAR "" "B_TOLERANCE" "B_TOLERANCE_SUFFIX_DCL")
);end-progn
);end-if
(set_tile "B_TOLERANCE_DIM_DCL" (rtos B_dim_size))
(B_TOLERANCE_CRITERION_DCL_DEFAULT)
(mode_tile "B_TOLERANCE_DIM_DCL" 1)
(mode_tile "B_TOLERANCE_DEFLECTION_DCL" 1)
(mode_tile "B_TOLERANCE_RATE_DCL" 1)
(mode_tile "B_TOLERANCE_CRITERION_DCL" 1)
(B_TOLERANCE_DEFLECTION_DCL_DEFAULT)
(setq B_criterion_it (nth (1+ B_tolerance_criterion) B_criterion_it_list))
(if (< B_tolerance_criterion 12)
(setq B_criterion_it (/ B_criterion_it 1000.0))
);end-if
(set_tile "B_TOLERANCE_CRITERION_DCL" (rtos B_criterion_it))
(setq B_criterion_it (nth (1+ B_tolerance_criterion) B_criterion_it_list))
(if (< B_tolerance_criterion 12)
(setq B_criterion_it (/ B_criterion_it 1000.0))
);end-if
(B_TOLERANCE_DEFLECTION_READ)
(B_TOLERANCE_CALCULATE)
(set_tile "B_TOLERANCE_DEFLECTION_SUR_DCL" (rtos B_tolerance_sur))
(set_tile "B_TOLERANCE_DEFLECTION_LAY_DCL" (rtos B_tolerance_lay))
);end-B_TOLERANCE_DCL_DEFAULT

(defun B_TOLERANCE_ACTION_TILE
(
/
)
(B_TOLERANCE_SET_BEGIN)
(if (not (new_dialog "B_TOLERANCE" B_tolerance_id))
(exit)
);end-if
(B_TOLERANCE_DCL_DEFAULT)
(action_tile "B_TOLERANCE_SHAFT_DCL" "(B_TOLERANCE_SHAFT_CHANGE) (B_TOLERANCE_HILITE B_TOLERANCE_SHAFT_DCL)")
(action_tile "B_TOLERANCE_SHAFT_S_DCL" "(B_TOLERANCE_SHAFT_CHANGE) (B_TOLERANCE_HILITE B_TOLERANCE_SHAFT_DCL)")
(action_tile "B_TOLERANCE_PREFIX_DCL" "(B_TOLERANCE_PREFIX_CHANGE) (B_TOLERANCE_HILITE B_TOLERANCE_PREFIX_DCL)")
(action_tile "B_TOLERANCE_MIDFIX_DCL" "(B_TOLERANCE_MIDFIX_CHANGE) (B_TOLERANCE_HILITE B_TOLERANCE_MIDFIX_DCL)")
(action_tile "B_TOLERANCE_SUFFIX_DCL" "(B_TOLERANCE_MIDFIX_CHANGE) (B_TOLERANCE_HILITE B_TOLERANCE_MIDFIX_DCL)")
(action_tile "B_TOLERANCE_DEFLECTION_S_DCL" "(B_TOLERANCE_DEFLECTION_SELECTION)")
(action_tile "B_TOLERANCE_RATE_S_DCL" "(B_TOLERANCE_RATE_SELECTION)")
(action_tile "cancel" "(done_dialog 0)")
(action_tile "accept" "(done_dialog 1)")
(setq B_tolerance_what (start_dialog))
);end-B_TOLERANCE_ACTION_TILE

(defun B_TOLERANCE
(
/
B_old_cmd;保存系统变量CMDECHO用
B_current_layer;保存当前层用
B_lay_exist
B_dim_ent
B_file_id;数据文件标号
B_date_file;数据文件名变量
B_dim_size;尺寸的大小
B_dim_height;
B_dim_or;判断是否自动生成的尺寸文本变量
B_dim_choose;盘断选择的标注实体是否有效
B_criterion_date_file
B_deflection_date_file
B_criterion_size_list;公差等级分段数据表
B_deflection_size_list;公差偏差分段数据表
B_criterion_count;尺寸在公差等级分段数据表中的位置
B_deflection_count;尺寸在公差偏差分段数据表中的位置
B_criterion_it_list;标准等级公差带表(尺寸一定)
B_criterion_it;标准等级公差带
B_deflection_es_list;标准等级偏差表(尺寸一定)
B_deflection_es;标准等级偏差
B_tolerance_id;DCL文件标号
B_tolerance_what;窗口循环变量
B_tolerance_shaft;判断尺寸是孔还是轴 10501--孔 10502--孔
B_tolerance_prefix;判断是否加前缀 10511--加 10512--不加
B_tolerance_midfix;判断是否加公差等级代号 10521--加 10522--不加
B_tolerance_code;公差偏差表
B_tolerance_rate;公差等级表
B_tolerance_deflection;选中的公差偏差
B_tolerance_criterion;选中的公差等级
B_tolerance_sur;上偏差值
B_tolerance_lay;下偏差值
)
(setq B_old_cmd (getvar "CMDECHO"))
(setvar "CMDECHO" 0)
(setq B_criterion_date_file "B_TOLERANCE_CRITERION.DAT")
(setq B_deflection_date_file "B_TOLERANCE_DEFLECTION.DAT")
(setq B_dim_choose 0)
(setq B_dim_object (car (entsel)))
(setq B_dim_ent (entget B_dim_object))
(B_TOLERANCE_READ_TXT);读出尺寸的大小
(if (>= B_dim_choose 0)
(progn
(if (null B_DATE_LIST_TWO) (load "B_DATE_LIST_TWO"))
(if (null B_NO_CENTER_LIST) (load "B_NO_CENTER_LIST"))
(if (null B_DATE_LIST_NO) (load "B_DATE_LIST_NO"))
(setq B_criterion_size_list (B_DATE_LIST_TWO B_criterion_date_file))
(setq B_criterion_count (B_NO_CENTER_LIST B_dim_size B_criterion_size_list))
(setq B_criterion_it_list (B_DATE_LIST_NO B_criterion_date_file B_criterion_count))
(setq B_criterion_it_list (mapcar 'atof B_criterion_it_list))
(setq B_deflection_size_list (B_DATE_LIST_TWO B_deflection_date_file))
(setq B_deflection_count (B_NO_CENTER_LIST B_dim_size B_deflection_size_list))
(setq B_deflection_es_list (B_DATE_LIST_NO B_deflection_date_file B_deflection_count))
(setq B_deflection_es_list (mapcar 'atof B_deflection_es_list))
(setq B_tolerance_id (load_dialog "B_TOLERANCE"))
(B_TOLERANCE_ACTION_TILE)
(if (> B_tolerance_what 0)
(progn
(B_TOLERANCE_DRAW)
);end-progn
);end-if
(unload_dialog B_tolerance_id)
);end-progn
);end-if
(setvar "CMDECHO" B_old_cmd)
(princ)
);end-B_TOLERANCE

(defun B_TOLERANCE_DRAW
(
/
B_draw_mid
B_draw_sur
B_draw_lay
B_draw_height
B_draw_dimheight
)
(if (/= (getvar "DIMTOLJ") 0)
(setvar "DIMTOLJ" 0)
)
(if (= B_dim_or "")
(setq B_dim_or "<>")
);end-if
(setq B_draw_dimheight (strcat "\\H" (rtos B_dim_height)))
(setq B_draw_height (strcat "\\H" (rtos (* B_dim_height 0.6))))
(if (> B_tolerance_sur 0.0)
(setq B_draw_sur (strcat "\\S+" (rtos B_tolerance_sur)))
(setq B_draw_sur (strcat "\\S" (rtos B_tolerance_sur)))
);end-if
(if (> B_tolerance_lay 0.0)
(setq B_draw_lay (strcat "^+" (rtos B_tolerance_lay) ";"))
(setq B_draw_lay (strcat "^ " (rtos B_tolerance_lay) ";"))
);end-if
(if (= (strcase B_tolerance_deflection) "JS")
(setq B_draw_tolerance (strcat "%%p" (rtos B_tolerance_sur)))
(setq B_draw_tolerance (strcat B_draw_height B_draw_sur B_draw_lay))
);end-if
(if (= B_tolerance_prefix 10512)
(setq B_dim_or (strcat "%%c" B_dim_or))
);end-if
(if (= B_tolerance_midfix 10522)
(progn
(setq B_draw_mid (strcat B_tolerance_deflection (itoa B_tolerance_criterion)))
(setq B_dim_or (strcat B_dim_or B_draw_mid "(" B_draw_tolerance B_draw_dimheight ")"))
);end-progn
(setq B_dim_or (strcat B_dim_or B_draw_tolerance))
);end-if
(setq B_dim_ent (subst (cons 1 B_dim_or) (assoc 1 B_dim_ent) B_dim_ent))
(entmod B_dim_ent)
(princ)
);end-B_TOLERANCE_DRAW


发表于 2005-1-2 22:03:00 | 显示全部楼层
借来学习一下
发表于 2005-1-2 22:29:00 | 显示全部楼层
帖子字很大!


虽然未下载,仍要学习!
发表于 2005-1-3 19:38:00 | 显示全部楼层
好,不错不错
发表于 2005-1-7 20:04:00 | 显示全部楼层
有什么问题吗?
发表于 2022-9-27 11:11:00 | 显示全部楼层
亡羊补牢,学而不晚,走走看看
您需要登录后才可以回帖 登录 | 注册

本版积分规则

小黑屋|手机版|CAD论坛|CAD教程|CAD下载|联系我们|关于明经|明经通道 ( 粤ICP备05003914号 )  
©2000-2023 明经通道 版权所有 本站代码,在未取得本站及作者授权的情况下,不得用于商业用途

GMT+8, 2025-2-23 10:45 , Processed in 0.201949 second(s), 26 queries , Gzip On.

Powered by Discuz! X3.4

Copyright © 2001-2021, Tencent Cloud.

快速回复 返回顶部 返回列表