[求助]

wfcst2004

真的很好用，谢谢呀！热心的大虾能留个联系方式么？好以后向你请教问题，不过在上面的问题中您能否解释一下为什么要加这些呢？是在不好意思，我还有个问题请教：我编写两段段插块的程序，圆我能插到指定点，为什么线的不能？程序如下：

'创建直线块
 Dim sblockobj(0) As AcadBlock
    Dim insertionpoint(0 To 2) As Double
    insertionpoint(0) = 2014#: insertionpoint(1) = 1436.5: insertionpoint(2) = 0#
    Set sblockobj(0) = acadApp.ActiveDocument.Blocks.Add(insertionpoint, "lineblock") '创建直线块
    Dim stp0(0 To 2) As Double
 Dim enp0(0 To 2) As Double
  stp0(0) = 2014: stp0(1) = 1436.5: enp0(2) = 0
 enp0(0) = 2016: enp0(1) = 1436.5: enp0(2) = 0
 Set plnObj = acadApp.ActiveDocument.ModelSpace.AddLine(stp0, enp0)
 Dim sblockRefobj As AcadBlockReference
insertionpoint(0) = 2014#: insertionpoint(1) = 1436.5: insertionpoint(2) = 0#
Set sblockRefobj(0) = acadApp.ActiveDocument.ModelSpace.InsertBlock(insertionpoint, "lineblock", 1#, 1#, 1#, 0) '插入块

'插入直线块

insertionpoint(0) = 2038.8: insertionpoint(1) = 1436.5: insertionpoint(2) = 0#
Set sblockRefobj(0) = acadApp.ActiveDocument.ModelSpace.InsertBlock(insertionpoint, "lineblock", 1#, 1#, 1#, 0)

为什么不能插到我指定的（2038.8，1436.5）点？

还有如果我想镜像很多对象时，我该怎么办？谢谢！

我的联系方式：E-mail:wfcst2004@163.com qq:46184430,您的那，能同您联系么？