删除重复线代码 求改进！

小鸟

酷酷提 发表于 2025-6-12 11:14
自带的怎么用

命令: _overkill

依然小小鸟

你有种再说一遍 发表于 2025-6-12 14:15
1,按照包围盒左下右上排序数组.
2,数量/CPU核心数,多线程从分块向后搜索.
3,得到碰撞的,再两两比较一下 ...

我不会写代码

hhh454

自带的速度快，这个代码当数量过万时会卡顿一会

依然小小鸟

hhh454 发表于 2025-6-12 17:06
自带的速度快，这个代码当数量过万时会卡顿一会

一般我的线 没有上万个

依然小小鸟

有大神吗

konoko

换个思路呢，比如删除指定长度的短线。应该也能相对去重吧？结合一下

jzjzjz

AI可以试试

xcmdos

jzjzjz 发表于 2025-6-20 18:07
AI可以试试

你是用的那个AI工具呢

jzjzjz

xcmdos 发表于 2025-6-21 11:10
你是用的那个AI工具呢

DeePSeeK弄的

KO你

论坛有，忘记原帖是谁的了
快捷键  eq  合并重叠线
(defun c:eq (/ jlgc in nor dxf tang chg_ent on_ent undup 2pi sline sarc scircle n ss ent pmt copyss subss)
(if (setq in (getreal "\n输入距离公差<0.01>:"))
(setq jlgc in)
(setq jlgc 0.01))
(defun copyss (s / ss tn)
(setq ss (ssadd))
(setq tn -1)
(repeat (sslength s)
(ssadd (ssname s (setq tn (1+ tn))) ss)))
(defun subss (ss1 ss2 / ten tn)
(setq tn -1)
(repeat (sslength ss2)
(setq ten (ssname ss2 (setq tn (1+ tn))))
(if (ssmemb ten ss1)
(ssdel ten ss1))))
(defun dxf (ent i)
(cdr (assoc i (entget ent))))
(defun tang (ang sty)
(rem (+ 2pi ang) sty))
(defun chg_ent (ent i pt / en)
(setq en (entget ent)
en (subst (cons i pt) (assoc i en) en))
(entmod en))
(defun on_ent (a a1 a2 sty)
(if (= sty "直线")
(equal (+ (distance a1 a) (distance a a2))
(distance a1 a2) jlgc)
(if (> a2 a1)
(and (> a2 (- a 1e-5)) (> a (- a1 1e-5)))
(or (> a2 (- a 1e-5)) (> a (- a1 1e-5))))))
(defun undup (s sty / nm m na ss ent1 spt1 ept1 cpt1 r1 ent2 spt2 ept2 cpt2 r2)
(setq n  -1 nm 0 na 0)
(cond
((= sty "圆")
(repeat (sslength s)
(setq ent1 (ssname s (setq n (1+ n))))
(if (entget ent1)
(progn
(setq cpt1 (dxf ent1 10) r1 (dxf ent1 40))
(if (> (sslength s) 1)
(progn
(setq ss (copyss s))
(ssdel ent1 ss)
(setq m -1)
(repeat (sslength ss)
(setq ent (ssname ss (setq m (1+ m))))
(if (or (not (equal (dxf ent 40) r1 1e-5))
(> (distance (dxf ent 10) cpt1) 1e-5))
(progn
(ssdel ent ss)
(setq m (1- m)))))
(vl-cmdf "_.erase" ss "")
(setq nm (+ nm (sslength ss)))))
(if (> (sslength sarc) 0)
(progn
(setq ss (copyss sarc))
(setq m -1)
(repeat (sslength ss)
(setq ent (ssname ss (setq m (1+ m))))
(if (or (not (equal (dxf ent 40) r1 1e-5))
(> (distance (dxf ent 10) cpt1) 1e-5))
(progn
(ssdel ent ss)
(setq m (1- m)))))
(subss sarc ss)
(vl-cmdf "_.erase" ss "")
(setq na (+ na (sslength ss)))))))))
((= sty "直线")
(repeat (sslength s)
(setq ent1 (ssname s (setq n (1+ n))))
(if (entget ent1)
(progn
(setq spt1 (dxf ent1 10)
ept1 (dxf ent1 11))
(if (> (sslength s) 1)
(progn
(setq ss (copyss s))
(ssdel ent1 ss)
(setq m -1)
(repeat (sslength ss)
(setq ent2 (ssname ss (setq m (1+ m))))
(setq spt2 (dxf ent2 10)
ept2 (dxf ent2 11))
(if (and spt2 ept2 spt1 ept1)
(progn
(cond
((and (on_ent spt2 spt1 ept1 sty)
(on_ent ept2 spt1 ept1 sty))
(entdel ent2))
((and (on_ent spt1 spt2 ept2 sty)
(on_ent ept1 spt2 ept2 sty))
(entdel ent1)
(setq ent1 ent2 spt1 spt2 ept1 ept2))
((and (and (setq nor (mapcar '- spt1 ept1))
(< (abs (- (car (trans spt2 0 nor))
(car (trans spt1 0 nor)))) jlgc)
(< (abs (- (car (trans ept2 0 nor))
(car (trans spt1 0 nor)))) jlgc))
(or (on_ent spt2 spt1 ept1 sty)
(on_ent ept2 spt1 ept1 sty)))
(entdel ent2)
(if (on_ent spt2 spt1 ept1 sty)
(setq spt2 ept2))
(if (> (distance spt1 spt2)
(distance ept1 spt2))
(progn (chg_ent ent1 11 spt2)
(setq ept1 spt2))
(progn (chg_ent ent1 10 spt2)
(setq spt1 spt2))))
(T (setq nm (1- nm))))
(setq nm (1+ nm)))))))))))
(t (repeat (sslength s)
(setq ent1 (ssname s (setq n (1+ n))))
(if (entget ent1)
(progn
(setq spt1 (tang (dxf ent1 50) 2pi)
ept1 (tang (dxf ent1 51) 2pi)
cpt1 (dxf ent1 10)
r1 (dxf ent1 40))
(if (> (sslength s) 1)
(progn
(setq ss (copyss s))
(ssdel ent1 ss)
(setq m -1)
(repeat (sslength ss)
(setq ent2 (ssname ss (setq m (1+ m))))
(if (entget ent2)
(progn
(setq spt2 (tang (dxf ent2 50) 2pi)
ept2 (tang (dxf ent2 51) 2pi)
cpt2 (dxf ent2 10)
r2   (dxf ent2 40))
(if (and spt2 ept2 cpt2 r2)
(progn
(cond
((and (< (distance cpt1 cpt2) 1e-5)
(on_ent spt2 spt1 ept1 sty)
(on_ent ept2 spt1 ept1 sty))
(entdel ent2))
((and
(< (distance cpt1 cpt2) 1e-5)
(on_ent spt1 spt2 ept2 sty)
(on_ent ept1 spt2 ept2 sty))
(entdel ent1)
(setq ent1 ent2 spt1 spt2 ept1 ept2)
(setq cpt1 cpt2 r1   r2))
((and (< (distance cpt1 cpt2) 1e-5)
(or (on_ent spt2 spt1 ept1 sty)
(on_ent ept2 spt1 ept1 sty)))
(entdel ent2)
(if (on_ent spt2 spt1 ept1 sty)
(progn (chg_ent ent1 51 ept2)
(setq ept1 ept2))
(progn (chg_ent ent1 50 spt2)
(setq spt1 spt2))))
(T (setq nm (1- nm))))
(setq nm (1+ nm))))))))))))))
(prompt (strcat "\n选择" (itoa (sslength s)) "个" sty "消去" (itoa nm) "个！"))
(if (> na 0) (prompt (strcat "消去" (itoa na) "个圆弧！"))))
(setq 2pi (* 2 pi) sline (ssadd) sarc  (ssadd) scircle (ssadd) n -1)
(setvar "cmdecho" 0)
(vl-cmdf "_.undo" "_be")
(prompt "\n请选择直线、圆弧或圆：")
(if (setq ss (ssget '((0 . "line,arc,circle"))))
(progn
(prompt "\n正在消除合并重复线条，请稍候...\n")
(repeat (sslength ss)
(setq ent (ssname ss (setq n (1+ n))))
(cond
((= (dxf ent 0) "LINE") (ssadd ent sline))
((= (dxf ent 0) "ARC") (ssadd ent sarc))
((= (dxf ent 0) "CIRCLE") (ssadd ent scircle))))))
(if (> (sslength sline) 1)
(progn (undup sline "直线") (setq pmt T)))
(if (or (> (sslength scircle) 1)
(and (= (sslength scircle) 1) (> (sslength sarc) 0)))
(progn (undup scircle "圆") (setq pmt T)))
(if (> (sslength sarc) 1)
(progn (undup sarc "圆弧") (setq pmt T)))
(if (and ss (not pmt))
(prompt "\n没有重复实体！"))
(vl-cmdf "_.undo" "_e")
(princ))
(princ)